2 Sets Of - Rear Window Glass Gas Lift Supports Strut Shocks Fit Blazer Jimmy Bravada

2 Sets of - Rear Window Glass Gas Lift Supports Strut Shocks Fit Blazer Jimmy Bravada
Every set can be described as following:

Fitment:
1995-2005 Chevy Blazer 2-Door With Dropgate Only (Not Fit Liftgate Model)
1995-2005 GMC Jimmy 2-Door With Dropgate (Not Fit Liftgate Model)
1997-1999 Chevy Blazer 4-Door With Dropgate Only (Not Fit Liftgate Model)
1997-1999 GMC Jimmy 4-Door With Dropgate Only (Not Fit Liftgate Model)
1997-2001 Oldsmobile Bravada With Dropgate Only (Not Fit Liftgate Model)
Please reference the picture below to know which kind of model will fit

Item-offered:
2pcs New Rear Left+Right Window Glass Lift Supports

Location
Rear Window Glass Left+Right

Parameters
Extended Length: 17.44 inch
Stroke Length: 6.46 inch
Compressed Length: 10.98 inch

Material
Steel

Cross-reference:
Can Replace The Following Part Numbers: SG330019; 4642; LCS-0166; WGS-166; 901285; D95544; 819-5638; 613149; 

Warranty
2 Year's Warranty

Color
Black

Installation-instructions

Always replace both lift supports to ensure top performance and to prevent twisting caused by uneven loading.

1.Turn off: If old lift support has a window demister electrical connection, carefully disconnect the fittings.
2. Before removing old lift supports, examine any fittings supplied to determine which components must be re-used.
3. Have someone hold the hatch, bonnet, boot or rear window open while replacing the lift supports.
4. Loosen the fasteners, remove 1 end while being prepared to fight the pressure in the strut, move the end so it's away from the bodywork, remove the other end, install that end of the new 1, wrestle the other end into place and tighten up.
5. Make sure all connectors and hardware are in place, tight and secure. Reconnect electrical terminals at both ends of the gas-charged lift support, if applicable to your car. Retain plastic end caps, if applicable to your car.

WARNING:

Use safety stands whenever a procedure requires you to be under the vehicle.

Features-advantages

Features:
Our Lift supports have the industry's highest quality in terms of long-lasting performance, smooth operation, functional safety, and ease of installation.
Our Lift supports have 2 Year's Warranty.
We feature the latest technology and most innovative features. Each gas charged lift support is tested in four different positions during compression and extension to measure speed and force. Each lift is then subjected to two overload tests to assure structural integrity and safety.
Enhances performance through improved oil and gas Pressure sealing.
Manufactured with bearing quality precision to promote longer operating life.